Operating instructions/Installation instructions

Before using for the first time
20
Con@ctivity via a direct WiFi connec-
tion (Con@ctivity 3.0)
Prerequisite:
– WiFi enabled Miele hob
If you do not have a home network, you
can establish a direct connection
between the hob and the cooker hood.
See the Hob instruction manual for de-
tails on how to connect them.
Instructions on how to connect the
cooker hood are repeated in detail be-
low.
 Switch the cooker hood off.
 Press and hold the button.
 Press the button at the same time.
2 will light up constantly, 3 will flash on
and off.
The cooker hood will be ready for con-
nection in the next 2minutes.
 Start WiFi connection on the hob. For
further details, see the hob operating
instructions.
When successfully connected, 2 and 3
will light up constantly.
 Quit connection mode on the cooker
hood by pressing the run-on but-
ton.
Con@ctivity has now been activated.
With a direct WiFi connection, it is not
possible to connect the hob and the
cooker hood to a home network.
Should this be required at a later date,
the WiFi connection between the hob
and the cooker hood must be discon-
nected (see “Sign out of WiFi”).