Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Guide to the cooker hood
- Modes of operation
- Before using for the first time
- Operation (Automatic mode)
- Operation (Manual mode)
- Operation (Automatic and Manual modes)
- Energy saving tips
- Cleaning and care
- After Sales / Warranty
- Installation
- Electrical connection
- Technical data
Before using for the first time
16
Connecting via the app
The Miele@mobile app can be used to
connect to your network.
Install the Miele@mobile app on your
mobile device.
For the registration, you will need:
1. Your WiFi network password
2. Your cooker hood password
The password for your cooker hood
consists of the last 9 digits of the serial
number. This can be found on the appli-
ance's data plate.
The data plate is visible after removing
the grease filter(s).
Start signing the appliance on in the
app. Follow the signing-on instruc-
tions.
If requested to activate WiFi on the
cooker hood, proceed as follows:
Switch the cooker hood off.
Press and hold the button.
Press the lighting button at the same
time.
2 will light up constantly, 3 will flash on
and off.
The cooker hood will be ready for con-
nection in the next 2minutes.
Follow the instructions in the app.
When successfully connected, 2 and 3
will light up constantly.
Quit connection mode on the cooker
hood by pressing the run-on but-
ton.
The cooker hood can now be operated
via the app.