Technical data

Cleaning and care
27
Cleaning the grease filters in a
dishwasher
 Place
the filters as upright as
possible in the lower basket, with the
short sides upright, ensuring the
spray arm is not obstructed.
 Use a pr
oprietary household
dishwasher detergent.
 Selec
t a dishwasher programme with
a wash temperature between 50 °C
and 65 °C.
Depending on the cleaning agent
used, cleani
ng the filters in a
dishwasher can cause permanent
discolouration to the surface.
However, this will not affect the
functioning of the filters in any way.
After cleaning
 Aft
er cleaning, leave the filters to dry
on an absorbent surface before
refitting them.
 When r
emoving the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
housing to prevent the risk of these
catching fire.
 Replace
the grease filters, making
sure that the locking clips are facing
down towards the cooktop.
 If a gr
ease filter is inadvertently
refitted upside down, insert a small
screwdriver blade into the slit to
disengage the clip.
Resetting the operating hours
count
er for the grease filters
After cleaning, the operating hours
counter needs to be reset.
 Whilst the fan is switched on, t
ouch
the grease filter control  for approx.
3 seconds, until only the 1 is flashing.
The grease filter symbol  goes out.
If the grease filters are cleaned before
the oper
ating hours counter has
reached its maximum,
 T
ouch the grease filter control  for
approx. 6 seconds, until only the 1 is
flashing.