Technical data

Operation (automatic and manual modes)
22
Activating and altering the operating
hou
rs counter for the NoSmell active
charcoal filter
Charcoal filters are needed for
r
ecirculation mode.
The operating hours counter for the
char
coal filters needs to be activated
once and the operating hours counter
needs to be set to suit the kind of
cooking you do:
 P
ress the On/Off touch control  to
switch the fan off.
 T
ouch the run-on option control 
and the charcoal filter control  at
the same time.
The charcoal filter symbol  and one
of the fan power settings will flash.
Fan power setting indicators 1 t
o IS
show the time set:
1.............................................
120 hours
2.............................................
180 hours
3............................................. 240 hours
IS ........................................
Deactivated
 T
ouch the relevant control to select
the duration required.
 Co
nfirm the selection by pressing the
charcoal filter touch control .
All the indicator lights will go out.
If you don't confirm your selection
within 4 min
utes, the rangehood will
automatically revert to the previous
setting.
Reading the filter operating hours
count
er
To check the percentage of time set
alr
eady used:
 P
ress the On/Off touch control  to
switch the fan on.
 P
ress and hold the grease filter
control  or the charcoal filter
control .
One or more of the fan power setting
indicat
ors will flash.
The number of flashing indicators
shows the per
centage of the operating
time which has already been used up.
Indicator 1
.................................... 25 %
Indicators 1 and 2
........................ 50 %
Indicators 1 t
o 3 ........................... 75 %
Indicators 1 t
o IS ........................ 100 %
The number of operating hours used
r
emains in the memory even when the
appliance is switched off or there is a
power cut.