Technical data

^
To activate Con|ctivity 2.0, touch the
IS sensor.
The search for a radio contact will start,
the 2 sensor lights up constantly and
the 3 sensor will flash.
^
In the meantime start the activation of
the cooktop.
Activating Con|ctivity 2.0 on
the cooktop
^
While the rangehood is searching for
the radio contact, start the activation
of the cooktop.
For information about this, please
refer to the Operating instructions for
the cooktop.
Radio contact is established.
The 2 and 3 sensors on the cooktop
light up constantly.
^ Confirm the activation of the
rangehood with the run-on sensor ¢.
All indicator lights will go out.
^
Confirm the activation of the cooktop.
The Con|ctivity 2.0 function can now
be used.
If confirmation does not occur within 4
minutes of the settings being made,
activation will not take place.
Checking if Con|ctivity 2.0
has been activated
If you want to check if the Con|ctivity
2.0 function of the rangehood has been
activated:
^
Switch off the fan and the cooktop
lighting.
^
Touch the run-on sensor ¢ for
approx. 10 seconds until the 1 sensor
lights up.
^
Then touch in turn
–
the 1 sensor,
– then the IS sensor,
– and finally the cooktop lighting touch
control I.
If Con|ctivity 2.0 is activated, the 2
and 3 sensors will light up constantly.
If Con|ctivity 2.0 is not activated, the 2
and 3 sensors will flash simultaneously.
^ To confirm the question, touch the
run-on sensor ¢. All the indicator
lamps will go out.
^
To check activation on the cooktop,
please refer to the Operating
instructions for the cooktop.
If radio contact cannot be
established despite the rangehood
and cooktop being activated, both
appliances must first be deactivated
and then reactivated.
Activating Con|ctivity 2.0
41