Technical data

a 3 protective sheets
for use when fitting the tower.
b 1 exhaust connectionfor exhaust
ducting C 150 mm.
c 1 reducing collar
for exhaust ducting C 125 mm.
d 1 non-return flap
for fitting into the exhaust socket on
the motor unit (not needed for
recirculation mode)
e Telescopic wall bracket for
securing the rangehood to the wall.
f Con@ctivity 2.0 stick
for retrofitting of the cooktop.
g Conversion kit for recirculation
mode
including directional unit, flexible
aluminium hose and hose clips (the
conversion kit is not supplied with
the rangehood but is available as an
optional extra; see "Technical data").
6 screws5x60mmand
6 plugs8x50mm
for securing the wall bracket.
,
The screws and plugs are
designed for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure that the wall is able to
take the weight of the rangehood.
2xM6self-tapping nuts
for securing the appliance.
2 screws 3.9 x 7.5 mm
for securing the tower.
1 lever
for dismantling the tower.
Installation instructions
Installation
35