Technical data

Fitting and replacing the
charcoal filter
If the rangehood is connected for
recirculation, a charcoal filter must be
inserted in addition to the grease filters.
This is designed to absorb cooking
odours and is fitted in the canopy
above the grease filters.
Replacement charcoal filters can be
obtained from Miele or via the internet
at www.miele-shop.com (depending on
country).
See back cover for contact details, and
"Technical data" for type and reference
number.
^ Before fitting or replacing the
charcoal filter, the grease filters must
first be taken out (see previous
section for instructions on how to do
this).
^ Unwrap the charcoal filter from its
packaging and insert it in the
charcoal filter frame.
^
Refit the grease filters.
When fitting for the first time:
^
Activate the operating hours counter
(see "Operation").
Always replace the charcoal filter im
-
mediately if
–
the charcoal filter sensor  lights up
or
–
it is no longer effective in absorbing
kitchen odours.
It should, however, be replaced at least
every 6 months.
Used charcoal filters can be disposed
of with the normal household waste.
Resetting the operating hours
counter for the charcoal filter
After replacing, the operating hours
counter needs to be reset.
^ Whilst the fan is switched on, touch
the charcoal filter sensor  for
approx. 3 seconds until only the 1
sensor is flashing.
The charcoal filter sensor  light will
go out.
If the charcoal filter is replaced before
the operating hours counter has
reached its maximum:
^
Touch the charcoal filter sensor  for
approx. 6 seconds until only the 1
sensor is flashing.
Cleaning and care
29