Technical data

^
After cleaning, leave the filters to dry
on an absorbent surface before
refitting them.
^
When removing the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
housing to prevent the risk of these
catching fire.
^
Refit the grease filters, making sure
that the locking clips are facing down
towards the cooktop.
^ If a grease filter is inadvertently
refitted upside down, insert a small
screwdriver blade into the slit to
disengage the clip.
Resetting the operating hours
counter for the grease filters
After cleaning, the operating hours
counter needs to be reset.
^
Whilst the fan is switched on, touch
the grease filter sensor [ for approx.
3 seconds until only the 1 is flashing.
The grease filter sensor [ light will
go out.
If the grease filters are cleaned before
the operating hours counter has
reached its maximum:
^ Touch the grease filter sensor [ for
approx. 6 seconds until only the 1
sensor is flashing.
Cleaning and care
28