Technical data

Searing process
^
If you switch a cooking zone on at the
highest power setting and switch to a
lower setting after approx. 60 to 90
seconds*, a searing process is
detected.
(*60 seconds to 5 minutes on a
HiLight cooktop.)
The rangehood switches on and, after
switching to a lower cooktop setting,
then switches to power level 3 and
remains at this level for approx.
5 minutes.
The fan power level is then determined
by the Con|ctivity 2.0 function.
^ You can also manually select a fan
power level before it is determined by
the Con|ctivity 2.0 function.
After cooking
^
When the cooktop is switched off, the
rangehood fan power level is
gradually lowered until it is finally
switched off.
This helps to neutralise any lingering
vapours or odours in the air.
–
The fan immediately switches from
the IS power level directly to power
level 3.
–
If the fan is operating at power level
3, it will switch to power level 3 after
approx. 1 minute.
– From power level 2, the fan switches
to power level 1 after approx.
2 minutes.
– After 2 minutes on power level 1, the
fan switches off completely.
– After a further 30 seconds, the
lighting will go out.
The cooking process is now finished.
Operation (automatic operation)
19