Technical data

If Con|ctivity 2.0 is activated, the
rangehood always operates in automat
-
ic operation (see "Activating
Con|ctivity 2.0").
To operate the rangehood manually,
see "Cooking without Con|ctivity 2.0".
Cooking with Con|ctivity 2.0
(automatic operation)
^
Switch on the cooking zone at the
required setting.
The cooktop lighting on the rangehood
switches on.
After a few seconds, the fan switches
on briefly on power level 2 and then it
changes to level 1.
The rangehood automatically selects
the power level during cooking. The
power level depends on the number of
switched on cooking zones and their
selected power settings.
^ If you increase a power setting on the
cooktop, or switch on more cooking
zones, the rangehood switches to a
higher power level.
^
The power level on the rangehood
adjusts accordingly when the power
settings on the cooktop are reduced
or cooking zones are switched off.
The rangehood's power level depends
on the entire switched on power of the
cooktop.
Examples of fan power levels 1 to 4 (IS)
Reaction time
The rangehood reacts with a slight
delay. This is because changing the
power setting on the cooktop does not
immediately result in more or few
vapours.
Because the cooktop sends information
to the rangehood in intervals, this can
also result in delays.
The reaction occurs within a few
seconds or a few minutes.
Operation (automatic operation)
18