Technical data

a 3 protective sheets
for use when fitting the tower.
b 2 hose clips for securing the
exhaust ducting.
c 1 reducing collar
for C 125 mm exhaust ducting.
d 1 non-return valve
for fitting into the exhaust connection
on the motor unit (not for
recirculation mode).
e 2 protective spacers
for use when fitting the tower
f Upper wall bracket
for securing the extension piece.
g Middle wall bracket for securing the
extension piece.
h Lower wall bracket for securing the
appliance unit.
i Conversion kit for recirculation
mode
including directional unit and flexible
aluminium hose (the conversion kit is
not supplied with the cooker hood
but is available as an optional extra.
See "Technical data").
8 screws5x40mmand
8xS8plugs
for securing the wall brackets.
The screws and plugs are designed
for use in solid walls only.
For other types of wall construction,
alternative fixings will be required.
Make sure that the wall is able to
take the weight of the cooker hood.
2xM6self-tapping nuts
for securing the appliance.
2 screws 3.9 x 7.5 mm
(not required)
1 allen key
for adjusting the height of the
appliance.
1 lever
for dismantling the tower.
Installation instructions
Installation
25