Technical data

The Miele DSM 400 control module can
be used to combine the cooker hood
with other components.
As the right and left hand sides of the
hood work independently of one
another, two control modules are
required for this.
Potential free connection
This can be used to operate a further
appliance via the On/Off button s on
the cooker hood.
If in any doubt, the advice of a
competent builder or, for gas, a Gas
Safe installer must be sought.
Connection to a light switch
The control modules can be used to
switch on the cooker hood lighting and
also to dim it, depending on model, via
a light switch in the house.
Installation
The cover plates securing the towers to
the ceiling need to be removed before
the control modules can be fitted into
the towers.
The electrical connection of
components to the control module
must be carried out by a suitably
qualified and competent person.
Operation with Control module DSM 400
27