Technical data

,
Before installation, it is important
to read the information given on the
following pages as well as the
"Appliance dimensions" and the
"Warning and Safety instructions" at
the beginning of this booklet.
This is particularly crucial when
using the cooker hood at the same
time as a heating appliance that
relies on oxygen from the same
room to avoid the danger of toxic
fumes building up.
Installation instructions
See enclosed Installation sheet for
instructions on how to install this
appliance.
Assembly parts
8 screws8x60mmwith
8 washers and
8 plugs S 10 to secure the cover plates
to the ceiling
,
The screws and plugs are for use
in concrete ceilings only.
For other types of construction,
alternative suitable fixings will be
required.
Make sure the ceiling is strong
enough to bear the weight of the
cooker hood.
4 screws M4x8mm
for securing the towers.
8 spacers
to use in the event of an uneven ceiling.
2 floating brackets
to offer a choice of position for the
exhaust cut-outs in the ceiling.
2 hose clips
for securing the exhaust ducting to the
floating brackets.
Installation
23