Technical data
Table Of Contents
- Contents
- Caring for the environment 3
- Warning and Safety instructions 4
- Guide to the appliance 10
- Mode of operation 12
- Miele|home 13
- Operation 14
- Cleaning and care 19
- Appliance dimensions 23
- Installation 24
- Connection for air extraction 25
- Electrical connection 27
- Operation with Control module DSM 400 28
- After Sales Service 29
- Technical data 30
The Miele DSM 400 control module can
be used to combine the cooker hood
with other components.
It enables the following:
Potential free connection
This can be used to operate a further
appliance via the On/Off button s on
the cooker hood.
If in any doubt, the advice of a
competent builder or, for gas, a Gas
Safe installer must be sought.
Connection to a light switch
The control module can be used to
switch on the cooker hood lighting and
also to dim it via a light switch in the
house.
Installation
The control module is fitted in the tower
after the cover plate has been
unscrewed from the ceiling.
The electrical connection of
components to the control module
must be carried out by a suitably
qualified and competent person.
Operation with Control module DSM 400
28