Technical data

Important!
If the exhaust ducting is to run through
rooms, ceiling space etc. where there
may be great variations in temperature
between the different areas, the
problem of condensation will need to
be addressed. The exhaust ducting will
need to be suitably insulated.
For exhaust ducting with a diameter of
200 mm, the following accessories are
required:
– Exhaust hose DAS 200
– Exhaust grille DFG 200, for mounting
on the external wall.
*Lead flashing
–
Roof ducting DDF 200, for mounting
on a sloping tiled roof.
–
Reducing collar for the exhaust stub
if using exhaust ducting with a
150 mm diameter.
Connection for air extraction
26