Technical data

Before any cleaning or maintenance
work is carried out, disconnect the
cooker hood from the mains supply.
Ensure that:
– it is switched off at the isolator,
or
– the fuse from the fused spur
connection unit is withdrawn, or
– the mains fuse is withdrawn, or
– the screw-out fuse is removed
(in countries where this is
applicable).
E-Cloth
^ A microfibre “E-Cloth” is available
from the Miele UK Spare Parts
Department or via the internet on
www.miele.co.uk. This which is
suitable for cleaning surfaces such
as stainless steel, glass, plastic and
chrome without the use of chemicals.
It can be washed 300 times.
Housing
General
The surfaces and controls are
susceptible to scratches and
abrasions. Please observe the
following cleaning instructions.
^
All external surfaces and controls can
be cleaned using an E-Cloth, or with
warm water and a little washing-up
liquid applied with a well wrung-out
soft sponge or cloth.
^
Wipe the surfaces dry using a soft
cloth.
Do not use too much water when
cleaning the controls. Water could
penetrate into the electronics and
cause damage.
Do not use:
–
cleaning agents containing soda,
acids, chlorides or solvents,
–
abrasive cleaning agents e.g.
powder cleaners or cream cleaners,
and abrasive sponges, e.g. pot
scourers or sponges which have
been previously used with abrasive
cleaning agents. These will damage
the surface material.
Important for appliances with
stainless steel housing
(This infomation does not apply to the
controls).
Stainless steel surfaces can be cleaned
using the Miele E-Cloth, or with a
suitable, non-abrasive, proprietary
cleaning agent, following the
manufacturer's instructions on the
packaging.
To help prevent re-soiling, a proprietary
conditioning agent for stainless steel
(available from the Miele Spare Parts
Department or via the internet on
www.miele.co.uk) can also be used.
Follow the manufacturer's instructions
on the packaging.
Cleaning and care
19