Technical data

a 3 protective sheets
for use when fitting the tower.
b 2 hose clips for securing the
exhaust ducting.
c 1 reducing collar
for exhaust ducting C 125 mm.
d 1 non-return flap
for fitting into the exhaust connection
on the motor unit (not needed for
recirculation mode).
e Telescopic wall bracket for
securing the cooker hood to the wall.
f Damper
to protect the glass canopy when it is
tilted up and down.
g Conversion kit for recirculation
mode
including directional unit and flexible
aluminium hose (the conversion kit is
not supplied with the cooker hood
but is available as an optional extra.
See "Technical data").
Installation instructions
8 large headed screws5x40mm
and 8xS8plugs for securing the
retaining plates and the appliance unit.
The screws and plugs are designed
for use in solid walls.
For other types of wall construction,
alternative fixings will be required.
Make sure the wall is strong enough
to bear the weight of the cooker
hood.
2xM6self-tapping nuts for securing
the appliance.
8 screwsM4x16mmfor securing the
canopy and the filter housing
1 hexagonal (Allen) key
for adjusting the height of the
appliance.
1 lever
for dismantling the tower.
Installation
31