Technical data
Table Of Contents
- Contents
- Caring for the environment 3
- Warning and Safety instructions 4
- Guide to the appliance 10
- Modes of operation 12
- Miele|home 13
- Operation 14
- Cleaning and care 21
- Appliance dimensions 28
- Installation 30
- Connection for air extraction 33
- Electrical connection 36
- Operation with DSM 400 control module 37
- After sales service 38
- Technical data 39
To switch the fan on
^
Press the On/Off control.
The fan runs at power level "II". The
indicator lamp will come on.
To select a power level
^ Use the – / + controls to select the
power level required.
+ control = higher setting
– control = lower setting
Depending on the intensity of the
cooking vapours, levels "I" to "III" are
usually sufficient for normal cooking.
Intensive setting
For short periods of cooking food with
intensive vapours and a strong aroma,
e.g. when searing meat, you may wish
to select the Intensive Setting "IV".
Automatic switch-off of the Intensive
setting
You can set the Intensive setting so that
it only runs for 10 minutes before
reverting automatically to level III.
^
To set this option, both the fan and
the hob lighting must be switched off.
^
Press the run-on option control for
approximately 10 seconds. The first
fan setting indicator will light up.
^ Then press in turn,
– the hob lighting control,
–
the – control, and
–
finally the hob lighting control again.
Operation
14