Technical data
Table Of Contents
- Contents
- Caring for the environment 3
- Warning and Safety instructions 4
- Guide to the appliance 10
- Modes of operation 12
- Operation 13
- Cleaning and care 15
- Appliance dimensions 20
- Installation 23
- Electrical connection 26
- Connection for air extraction 27
- Operation with Control module DSM 400 30
- After Sales Service 31
- Technical data 32
The Miele DSM 400 control module can
be used to combine the cooker hood
with other components.
It enables the following:
Potential free connection
This can be used to operate a further
appliance via the On/Off button s on
the cooker hood.
The potential free contact on the
DSM 400 a can, for example, be used
in a cooker hood with an external motor
...EXT, which is connected to a central
ducting system.
The contact can then be used to
operate an electrically driven non-return
flap b which is connected to the
central extraction unit c.
Components used in the central
ducting system are not supplied by
Miele.
If in any doubt, the advice of a
competent builder or, for gas, a Gas
Safe installer must be sought.
Connection to a light switch
The control module can be used to
switch on the cooker hood lighting via a
light switch in the house.
Installation
The tower needs to be removed before
the control module can be fitted to the
motor unit.
The electrical connection of
components to the control module
must be carried out by a suitably
qualified and competent person.
Operation with Control module DSM 400
30