Technical data

a 3 protective sheets
for use when fitting the tower.
b 1 exhaust connection for exhaust
ducting C 150 mm.
c 1 reducing collar for exhaust
ducting C 125 mm.
d 1 non-return valve
for fitting into the exhaust connection
on the motor unit (not for
recirculation mode).
e Upper wall bracket
for securing the extension piece.
f Middle wall bracket
for securing the extension piece.
g Lower wall bracket
for securing the appliance unit.
h Conversion kit for recirculation
mode
including directional unit and flexible
aluminium hose with clips (this is not
included, but is available as an
optional extra - see Technical Data).
8 screws5x40mmand
8xS8plugs for securing the retaining
plates to the wall.
,
The screws and plugs are
designed for use in solid walls.
For other types of wall construction,
alternative fixings will be required.
Make sure the wall is strong enough
to bear the weight of the cooker
hood.
2xM6self-tapping nuts
for securing the appliance.
2 screws 3.9 x 7.5 mm
for securing the tower.
1 lever
for dismantling the tower.
Installation instructions
Installation
25