Technical data
Table Of Contents
- Contents
- Caring for the environment 3
- Warning and Safety instructions 4
- Guide to the appliance 10
- Modes of operation 12
- Operation 13
- Cleaning and care 15
- Appliance dimensions 20
- Installation 23
- Electrical connection 26
- Connection for air extraction 27
- Operation with Control module DSM 400 30
- After Sales Service 31
- Technical data 32
–
Please be aware that if positioned
too high, extraction will be inefficient.
–
If you want the top of the cooker
hood telescopic extension piece to
be mounted flush with the ceiling,
make sure there is adequate space
below the appliance for working. See
maximum/minimum appliance height.
Drilling diagram
This diagram illustrates where holes for
Ø 5 mm screws need to be drilled in
the rear wall.
* The dimension between the ceiling
and the middle bracket can vary
depending on the position of the vent
cut-out and the connection socket. It
should be installed as low as possible.
If the cooker hood is being secured
directly to the wall, please follow the
drilling instructions given in the
installation instructions supplied.
Appliance dimensions
22