Technical data
Table Of Contents
- Contents
- Caring for the environment 3
- Warning and Safety instructions 4
- Guide to the appliance 10
- Modes of operation 12
- Operation 13
- Cleaning and care 15
- Appliance dimensions 20
- Installation 23
- Electrical connection 26
- Connection for air extraction 27
- Operation with Control module DSM 400 30
- After Sales Service 31
- Technical data 32

To switch the fan on s
^
Press the On/Off control s.
The fan will come on at power level lI.
To select a power level - / +
^
To select a lower power level, press
the – symbol, or to select a higher
power level, press the + symbol.
Depending on the intensity of the
cooking vapours, levels "I" to "III" are
usually sufficient for normal cooking.
Intensive setting
For short periods of cooking food with
intensive vapours and a strong aroma,
e.g. when searing meat, you may wish
to select the Intensive Setting "IV".
Automatic switch-off of the Intensive
setting
You can set the Intensive setting so that
it only runs for 10 minutes before
reverting automatically to level III.
^
To set this option, both the fan and
the hob lighting must be switched off.
^
Press the – and + controls at the
same time for approx. 10 seconds
until the first power level indicator
lamp lights up in the display.
^
Then press in turn:
– the Hob lighting control I,
– the – symbol, and
– the Hob lighting control I again.
The indicator lamps for fan power levels
I and IV will flash if the automatic
switch-off for the Intensive setting is not
activated.
^ Press the + control to activate auto-
matic switch-off.
The indicator lamps for fan power
levels I and IV will now light up
constantly.
Press the – control to deactivate the
automatic switch-off function.
^
Press the On/Off s control to
confirm.
If you do not confirm within 4 minutes,
the cooker hood will automatically
revert to the original setting.
Operation
13










