Technical data
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the Ventilation System 8
- Functional description 10
- Operation 11
- Cleaning and Care 13
- After Sales Service 17
- Installation instructions 19
- Caring for the environment 21
- Appliance dimensions 22
- Structural support 26
- Installation 27
- Electrical connection 30
- Air extraction 31
- Technical data 33
Drilling diagram
To prepare a backing plate, the
spacings for the 5 mm screws need to
be drilled as shown.
* The dimension between the ceiling
and the middle bracket may vary
depending on the position of the vent
cut-out and the power socket. It should
be installed as low as possible.
If the ventilation hood will be mounted
directly to the wall, follow the additional
instructions given in the included
"Installation diagram".
Appliance dimensions
25