Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Guide to the appliance
- Modes of operation
- Operation
- Energy saving tips
- Cleaning and care
- Service
- Installation
- Before installation
- Installation recommendations
- Installation materials
- Appliance dimensions
- Safety distance between hob and cooker hood (S)
- Attaching the front panel
- Aligning the deflector plate
- Fitting the grease filter
- Connecting the exhaust ducting
- Setting up recirculation mode
- Power connection
- Electrical connection
- Connection for air extraction
- Technical data
Installation
*INSTALLATION*
30
Dia. 3: DA 3496 in a 600mm wide wall unit or in a 900mm wide wall unit with side
sections.
The diagram is not drawn to scale.
See diagram 1 for side view.
Footnotes for diagrams 1 to 3:
a
The front section of the wall unit must be fitted with a base panel to secure the
cooker hood.
b
If partition wall is to be provided in the unit, it must be removable.
c
The brackets supplied are suitable for furniture units with 16 and 19mm thick
sides.
d
DML 400 bracket (optional accessory) for fitting a front panel.
e
DSM 400 accessory
* In this installation situation, the deflector plate is flush with the front edge of the
housing unit carcase. If you wish to position the cooker hood further forward or
further back (e.g. because it has a front panel this dimension has to be adapted
accordingly.