Technical data

Changing a halogen lamp
^
Before any cleaning or maintenance
work, disconnect the cooker hood
from the mains supply. Ensure that:
–
it is switched off at the isolator, or
–
it is switched off at the wall socket
and the plug is withdrawn, or
–
the fuse from the fused spur
connection unit is withdrawn, or
–
the mains fuse is disconnected, or
–
the screw-out fuse is removed (in
countries where this is applicable).
,
Exercise caution when changing
halogen lamps. They get very hot
during use and remain hot for some
time after being switched off. Let
them cool down before you change
them.
^
Use the lever supplied to pull the
halogen lamp out of its socket.
Take care not to let the lamp fall onto
the hob below.
^ Insert the new halogen lamp into its
socket and carefully push into
position.
Please follow the manufacturer's
instructions.
When replacing a defective lamp
you should use exactly the same
type of lamp (see "Technical data"
for lamp specification).
Cleaning and care
24