Technical data

Changing a halogen lamp
^
Before any cleaning or maintenance
work, disconnect the rangehood from
the mains supply. Ensure that:
–
it is switched off at the isolator, or
–
it is switched off at the wall socket
and the plug is withdrawn, or
–
the mains fuse is disconnected, or
–
the screw-out fuse is removed (in
countries where this is applicable).
,
Exercise caution when changing
halogen lamps. They get very hot
during use and remain hot for some
time after being switched off. Let
them cool down before you change
them.
^
Remove the stainless steel outer filter
(see "Cleaning and care").
^
Pull the halogen lamp out of its
socket. Take care not to let the lamp
fall onto the cooktop below.
^
Insert the new halogen lamp into its
socket and carefully push into
position.
When replacing a defective lamp, it
is suggested that you use exactly
the same type of lamp (see
"Technical data" for lamp
specification).
Cleaning and care
27