Technical data

Recirculation
If site conditions are not suitable for the
cooker hood to be used with air
extraction, the appliance must be set
up for recirculation.
For this, conversion kit DUU 151
(available from your Miele dealer or the
Miele Spare Parts Dept.) is required.
You will also need two charcoal filters
(see “Technical data”).
^
Dismantle the non-return flap.
^
Take the on-site conditions into
account when fitting the conversion
kit.
When fitting the exhaust grille make
sure that the slats in the grille point
towards the centre of the room and
not directly towards a wall or the
ceiling.
^
Fit the charcoal filters.
Electrical connection
Before connecting the appliance
read the safety notes in "Warning
and Safety instructions" and
"Electrical connection".
Installation
19
110
240
90
223
160
33
40
dai2453
319
143
10
150