Quick Start Guide

fold here fold here fold here fold here fold here
fold herefold herefold herefold herefold here
fold here
fold here
Quick Start Guide
Coffee machine
These short instructions are not a substitute for the operating instructions supplied
with the machine. It is essential to familiarise yourself with the coffee machine
before using it for the first time. Please read the operating instructions carefully and
pay particular attention to the Warning and Safety instructions.
en - GB M.-Nr. 11 203 981 COFFEE THE WAY YOU LIKE IT SETTINGS CLEANING AND CARE
Cleaning and care Coffee the way you like it Settings
Bean system
You can change the names for the types
of coffee bean and/or reallocate the types
of bean under Settings|Typeofbeans.
If you do not allocate a type of bean, you
will be asked what type of bean you want
to use for the coffee as you make it.
Renaming the type of beans
The 3bean containers are shown in the
display as follows and are pre-named.
If you are using the same type of beans in
two or three bean containers at the same
time (for instance because you only use
one type of bean), make sure you name
them in exactly the same way.
ĺ Select Changename.
ĺ Enter the name you want and then
touch Save.
Allocating types of beans
ĺ Select Changeallocation.
If you have set up at least 1profile and at
least 1coffee drink, first select the profile.
ĺ Change the allocation as required and
then confirm withOK.
Tip: If you tap Alldrinks, you will highlight
all coffee drinks and you can deselect the
ones you do not want.
Drink parameters
You can set the quantity of coffee, the
brewing temperature and pre-brewing for
each drink individually.
ĺ Touch the drink you want and keep
your finger on it until the context menu
opens.
ĺ Touch Changedrink and select a drink.
ĺ Touch Drinkparameters.
ĺ Select Quantityofcoffee, Brew
temperature, Pre-brewing or Typeofbeans.
ĺ Select the setting you want and
touchOK.
ĺ TouchOK again to save your changed
settings.
Portion size
You can adjust the portion size for all
coffee drinks, hot water, all types of tea
and drinks with milk.
ĺ Place a cup under the central spout.
ĺ Touch the drink you want and keep
your finger on it until the context menu
opens.
ĺ Touch Portionsize.
The drink will be made and Save will
appear in the display as soon as the
minimum dispensing amount is reached.
ĺ When the cup is filled up to the level you
want, touchSave.
If you want to change the portion size for
coffee drinks made with milk or hot water,
the ingredients which make up the drink
will be saved one after the other while the
drink is being made.
Performance mode
You can select the appropriate mode
to suit your personal preferences under
Settings|Performancemode. The energy
consumption varies depending on the
selected mode.
– Eco mode: This is an energy-saving
mode.
– Barista mode: This mode is optimised
for espresso and coffee drinks.
– Latte mode: In this mode, milk-based
drinks can be prepared within a much
shorter space of time.
In addition, you can activate Party mode
for the occasional intensive use of the
coffee machine, e.g. for family get-
togethers (see the operating instructions).
Profiles
In addition to the Miele drinks menu
(Miele profile), you can create individual
profiles to cater for different tastes and
preferences.
Creating a profile
ĺ Select Profiles followed by Createprofile.
The editor will open in the display.
ĺ Enter the name you want and then
touch Save.
The profile has been created. You can now
create a drink.
Processing a profile
Once you have created 1profile, you can
rename, delete or move profiles via the
context menu.
Setting when the profile should change
You can choose between the following
options:
– Manually: the selected profile will
remain active until you select another
profile.
– After each use: The machine will revert
to the Miele profile whenever a drink is
dispensed.
Creating and processing drinks
in a profile
You can create new drinks based on
existing drinks. A profile can contain a
maximum of 9drinks.
ĺ Start by accessing the profile you want
as follows: touch Profiles and select the
profile.
ĺ Touch Createdrink and select a drink.
ĺ Change the portion size or drink
parameters.
Preparation will begin and you can save
the portions of each component as
desired.
ĺ Enter a name for the new drink and
touch Save.
Once you have created some drinks, you
can edit these entries in the context menu.
Cleaning the central spout
Clean the central spout's stainless
steel cover by hand only.
ĺ Open the appliance door.
ĺ Remove the central spout's stainless
steel cover and clean it.
ĺ Detach the milk pipework from the
dispensing unit. Pull the dispensing
unit down to remove it.
ĺ Take the dispensing unit apart,
separating it into 3components.
ĺ Clean all parts thoroughly. Clean the
surfaces of the central spout with a
damp cloth.
ĺ Fit the dispensing unit back together.
ĺ Push the dispensing unit back into the
central spout and replace the stainless
steel cover.
ĺ Confirm the message withOK.
Removing the brew unit and
cleaning it by hand
Only clean the brew unit by hand with
warm water. Do not use any cleaning
agents.
ĺ Open the appliance door and remove
the water container.
ĺ Press the button under the handle of the
brew unit and, whilst doing so, turn
the handle forwards.
ĺ First, pull the brew unit sideways and
then slide it out forwards. Tilt the
brew unit forwards.
When you have removed the brew
unit, do not change the position of the
handle on the brew unit.
ĺ Clean the brew unit by hand under
warm running water.
ĺ Wipe any remaining coffee off the filters
(see arrows).
ĺ Dry the funnel in the brew unit.
ĺ Carefully clean the inside of the coffee
machine.
ĺ Push the brew unit back into the coffee
machine.
ĺ Lock the brew unit. Press and hold the
button under the brew unit handle and,
whilst doing so, turn the handle to the
right.
ĺ Close the appliance door.
ĺ Follow the further instructions given in
the display.
The process is complete when rinsing has
finished.
Descaling the appliance
You will need 2descaling tablets for the
descaling programme.
The Descaletheappliance message appears
in the display.
ĺ Touch OK.
The maintenance programme will then
start.
ĺ Follow the instructions in the display.
ĺ Fill the water container to the descaling
symbol with lukewarm water.
ĺ Drop 2descaling tablets in the water.
ĺ Push the water container back into the
machine.
ĺ Follow the further instructions given in
the display.
When Rinsethewatercontainerandfill
withfreshwatertothedescalingsymbol
appears in the display:
ĺ Remove the water container and rinse
it thoroughly with clean water. Fill
the water container to the descaling
symbol with fresh tap water.
The descaling process is complete when
rinsing has finished.
You can personalise your coffee machine
by adapting the factory default settings to
suit your requirements.
Factory default settings are marked in
italics.
Language
– German|...other languages
– Location
Time
– Display: On| Off| Night dimming
– Clock display: Analogue| Digital
– Clock format: 24h| 12h (am/pm)
– Set
Tip: If you touch the time of day on the
top right of the display, you can set
the time directly.
Date
The date appears if the Time| Clock
type| Digital setting is selected.
Status display
– Main menu| Drinks | Profiles |
MyMiele
Select the menu that is displayed
when the coffee machine is switched
on.
Timer
– Appliance timer: Switch on at|
Switch off at| Switch off after (0:20)
– TeaTimer: Automatic| Manual
– Maintenance Timer
Volume
– Buzzers
– Keypad tones
Display
– Brightness
– Colour scheme: Bright| Dark
– QuickTouch: On| Off
Lighting
You can use the sensor control
to switch the lighting on or off at any
time, provided that the coffee machine
is switched on.
If the coffee machine is switched off,
you can still switch the lighting on or
off whenever you like but you will need
to select the following settings first:
– Time| Display | On or Nightdimming
(time of day is displayed)
– Display| QuickTouch| On
Info
– Number of portions (Total no. of
portions| Total coffees|...)
– No. of portions until maintenance
programme: Descale the appliance|
Degrease the brew unit
– Fill levels (of cartridges)
Fresh water (CVA7845)
– On| Off
Altitude
0–250m, 251–500m,...
Performance mode
– Eco mode| Barista mode| Latte
mode| Party mode
Party mode is a Performance mode
for the occasional intensive use of
the coffee machine (see the operating
instructions).
Water hardness
Set to21°dH by default.
Automatic cleaning
– On| Off
Type of beans
– Type A, B and C: Change name|
Change allocation
Movement sensor
– Switch on the light: Appliance
switched on (On| Off) | Appliance
switched off (On| Off)
– Switch on the appliance: On| Off
– Acknowledge buzzers: On| Off
System lock
– On| Off
When the system lock is activated,
the Switchonat option for the timer
and the movement sensor cannot be
selected.
Miele@home
– Setup| Deactivate/activate|
Connection status| New setup
– Remote control (On| Off)
– SuperVision: SuperVision display
(On| Off), display in Standby mode
(On| Off), appliance list
– RemoteUpdate (On| Off)
Some menu options only appear if
Miele@home has been set up and the
coffee machine has – where applicable
– been connected to a WiFi network.
Software version
For the Customer Service Department
Legal information
– Open source licences
Showroom
– Demo mode: On| Off
Factory default settings
– Appliance settings
Language, Time, Date, Number of
portions, Miele@home settings,
Profiles and the corresponding drinks
cannot be reset.
The Maintenance Timer is reset to
2am.
– MyMiele
Type of beans
Type A Type B
Type C