Operating instructions Coffee System CVA 2660 To prevent accidents and machine damage read these instructions before installation or use. UV M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Guide to the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 First steps to use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Turning the machine on and off . . . . . . .
Contents Daily coffee system care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Common coffee system care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 Descaling the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Descaling prompts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Fault messages . . . . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should always be followed, including the following: Read all instructions before installation or use of the coffee system. Please read these instructions carefully to prevent accidents and machine damage. This appliance is for household use only. Do not use appliance for other than intended use. Any other use could be dangerous. This appliance complies with current safety requirements.
IMPORTANT SAFETY INSTRUCTIONS Installation work and repairs should only be performed by a trained technician in accordance with national and local safety regulations. Repairs and other work by unauthorized persons could be dangerous. Never open the outer casing of the appliance. Tampering with electrical connections or components and mechanical parts is dangerous and may cause machine damage.
IMPORTANT SAFETY INSTRUCTIONS The water lines must be rinsed and the machine cleaned thoroughly before the first coffee is prepared. See “Daily coffee system care”. The use of accessories not recommended by the appliance manufacturer may result in fire, electric shock or injury to persons. Do not reach into the perforator. Injuries may occur. Do not use damaged, broken or dented capsules! They may jam in the machine and damage it.
Guide to the machine Front view a Left display d Right display b Left jog shuttle e Upper door handle (for installation at countertop height) Press this jog shuttle to turn the machine on and off. Turning it selects a desired program, option or setting. c Right jog shuttle Press this jog shuttle: – to start and stop the dispensing of coffee or hot water. – to select an option to alter or customize a program. – to save a setting into memory when the machine is turned off.
Guide to the machine Interior view l Main switch o Capsule carousel m Capsule plate (replaced with the descaling funnel when descaling is performed) p Carousel tray n Perforator (not visible, penetrates capsule to assist in the brewing process) q Water tank r Drip tray with grid (grid avoids spilling during transport) s Waste container 9
Displays Left display Right display COSI K1 2 3 4 5 LANGUAGE L o n G k C – Drink selection Up to 5 different coffee types K, as well as, steam L and hot water o – User profile Up to 4 different users n – Important maintenance Rinsing G, descaling k – Selection of Settings C F Y K n I I J Z – selects coffee or espresso – shows current actions, e.g. heating – prompts an action, e.g. close the door Individual settings and information can be selected in the right hand display.
First steps to use Turning the machine on and off Turning on The appliance must be correctly installed and connected before the first use. ^ Press the left jog shuttle. Míele Welcome! When turned on for the first time, a welcome screen along with other messages will appear in the right display. The welcome screen will be displayed each time the machine is turned on until 5 drinks (including steam) have been prepared. COSI K1 2 3 4 5 L o n G k C The displays light.
First steps to use Before using the coffee system for the first time ^ Hand wash the coffee capsule plate with hot water and liquid dish soap. ^ The water tank can be washed in the dishwasher. G k C ^ Turn the left jog shuttle to "Rinse". ^ Press the right jog shuttle. Water runs from the coffee dispenser. Water runs from the steam valve. ^ Open the appliance door. ^ Lift the water tank and pull it out. ^ Fill the container with fresh, cold tap water to the "Max." mark.
Filling water and coffee capsules Filling the water tank The water tank should be washed and filled with fresh cold tap water before each day of use. Never put hot water or any other liquid except cold water into the water tank. ^ Open the appliance door. ^ Lift the water tank and pull it out. ^ Fill the container with fresh, cold tap water to the "Max." mark. A valve at the tank front prevents leaks. ^ Push the water tank back into the machine.
Filling water and coffee capsules Filling the coffee capsule carousel Only insert Nespresso coffee capsules in the carousel. Damaged, broken or dented capsules should not be used they may jam in the machine. There are five chambers, each can hold four capsules. The coffee types have to be allocated to their respective chambers to get the desired coffee type. You can also fill each chamber with the same coffee type. The chambers are factory set for a coffee type.
Allocating various coffee types Twelve different Nespresso coffee types are available for this coffee system. They differentiate in terms of acidity, fruitness, bitterness and roast. Therefore the preparing times will vary. See "The Espresso / Lungo range" for more information on the coffee types. Allocating the coffee types ^ Take the carousel from the machine to see which coffee type is filled in each chamber.
Allocating various coffee types Allocating different coffee types To enter text CHAMBER 5 ARPEGGIO ~ ^ Repeat until the desired name is entered. ^ Turn the right jog shuttle to the desired coffee type and press to confirm it to that chamber. To delete text ^ If you made a mistake, turn the right jog shuttle until "delete" appears in the display. Setting a new coffee type CHAMBER 5 + save as ^ Turn the right jog shuttle to the first letter or number and press to confirm.
Making coffee Rinse the water lines before preparing the first drink of the day. If the "Automatic rinsing" option is set to "on" and the machine is still cold this will take place automatically. The heating system will heat and the water lines will be rinsed. If the "Automatic rinsing" option is set to "off", use the option "Rinse" in the left display to rinse the lines. See "Daily coffee system care". ^ Press the left jog shuttle to turn the machine on.
Making coffee Prewarming the cups Prewarming the cups allows the coffee to fully develop the flavor and aroma. Use caution. Steam and hot water are very hot. ^ Place a cup under the steam / hot water valve. To prewarm with hot water HOT WATER K1 2 3 4 5 L o n G k C ^ Turn the left jog shuttle to the "Hot water" option. ^ Press the right jog shuttle and half fill the cup with hot water. ^ Press the right jog shuttle again to stop the water from dispensing.
Making coffee Espresso and coffee Interrupting the brewing The flavor of the coffee depends on the coffee capsule and the quantity of water used. To ensure the machine uses exactly the amount of water to suit your taste and your cup size, there is a choice of four serving sizes for espresso / coffee. ^ Press the right jog shuttle to interrupt the coffee dispensing immediately. For coffee / espresso recipes see the "Coffee glossary".
Making coffee Cappuccinatore (milk froth mug) A cappuccinatore (milk froth mug) is supplied with the appliance. Before using the cappuccinatore for the first time, wash it either in the dishwasher or with hot water and liquid dish soap. See "Common coffee system care". The cappuccinatore has a valve, a, over the handle and a spout on its side, b. Cold, whole milk is best for creating froth. The higher the fat content, the better the froth.
Making coffee Frothing milk into the cup ^ Prewarm the cup before filling with froth. ^ Fill the cappuccinatore to the upper "max" mark with cold milk. The steam supply is temporary. If the steam stops and there is not enough froth prepared, push the steam lever up then down again. ^ Turn the spout to the cup symbol. ^ Turn the valve over the handle to the froth symbol. ^ Place the cappuccinatore under the steam valve. ^ Place a cup underneath the spout of the cappuccinatore.
Making coffee Frothing milk in the cappuccinatore Rinsing the lid ^ Fill the cappuccinatore to the lower "max" mark with cold milk. For a quick cleaning between froths the cappuccinatore lid can be rinsed with the steam valve. ^ Turn the spout to the cappuccinatore symbol. ^ Turn the valve over the handle to the froth symbol. HEATING WITH STEAM K1 2 3 4 5 L o The rinsing does not replace the cleaning of the cappuccinatore in a dishwasher. ^ Turn the spout to the cup symbol.
Dispensing hot water Hot water ^ Place a cup under the hot water / steam valve. HOT WATER K1 2 3 4 5 L o n G k C ^ Turn the left jog shuttle to "Hot water". ^ Press the right jog shuttle to confirm. ^ Press again to stop the water from dispensing.
Setting serving sizes The flavor of the coffee depends on the coffee type and the quantity of water used. To ensure the machine uses exactly the amount of water to suit your taste and your cup size, there is a choice of two serving sizes for espresso / coffee. q The espresso symbol dispenses a standard size espresso. The espresso water amount can be set between 1 and 2.5 oz (30 and 75 ml). r The coffee symbol dispenses coffee for a standard size coffee cup.
Setting user profiles Setting the user name To enter text Up to four different user profiles can be programmed to accommodate different preferences and serving sizes. See "Setting serving sizes". ^ Turn the right jog shuttle to the first letter or number and press to confirm. The selected letter shows in the upper line. SETTINGS F K1 2 3 4 5 L o n G k C ^ Turn the left jog shuttle to "Settings".
Setting user profiles Setting user profiles (serving sizes) Making espresso / coffee with user profile In addition to the default, different serving sizes can be programmed for four additional users. If a user profile was set, select the profile first before preparing a drink. PROFILE K1 2 3 4 5 K1 2 3 4 5 L o n G k C ^ Turn the left jog shuttle to "Profile". USER TEST n -> <- 1 PROFILE ^ Turn the right jog shuttle until the desired user name is selected. Press to confirm.
Settings The coffee system can be customized to suit individual preferences. Selecting a language SETTINGS F K1 2 3 4 5 L o n G k C ^ Turn the left jog shuttle to "Settings". LANGUAGE F Y K n I I J Z The language symbol is selected in the right display. ^ Press the right jog shuttle to select the language option. LANGUAGE English B ~ ^ Turn the right jog shuttle until the desired language shows in the display. A check marks the selected language.
Settings Setting the time of day TIME OF DAY SETTINGS F K1 2 3 4 5 L o n G ^ Turn the left jog shuttle to "Settings". LANGUAGE F Y K n I J Z 12 TIMES Y I J Z 00 ^ Turn the right jog shuttle to select the minutes, press to confirm. Y o TIME OF DAY Y o A ^ Press the right jog shuttle again. TIME OF DAY 24 h clock ^ Turn the right jog shuttle to select the time format, press to confirm. 28 : TIME OF DAY K n I ^ Turn the right jog shuttle to the clock symbol, press to confirm.
Settings Turning off after Standby time To conserve energy the coffee system can be set to turn off automatically after a programmed time interval. A time period between 20 minutes and 2 hours can be selected. The time is measured from the last time coffee / espresso was dispensed. The setting will be automatically saved and the display will go back to the previous screen. The coffee system will turn off at the preset time.
Settings Turning on at a preset time A specific time can be set to turn the machine on, e.g. for breakfast. In order to use this function the clock has to be set. SETTINGS F K1 2 3 4 5 L o n G k C ^ Turn the left jog shuttle to "Settings". TIMES F Y K n I I J Z ^ Turn the right jog shuttle to the clock symbol, press to confirm. SWITCH ON AT Y o A f ) ^ Turn the right jog shuttle to "Switch on at" (this will only be seen if the clock is correctly set).
Settings Turning off at a preset time A specific time can be set to turn the coffee system off. In order to use this function the clock has to be set. SETTINGS F K1 2 3 4 5 L o n G k C The setting will be automatically saved and the display will go back to the previous screen. The coffee system will turn off at the preset time. If rinsing is set to "on" and the machine has been used, the coffee system will automatically rinse the lines before turning off. ^ Turn the left jog shuttle to "Settings".
Settings Setting lighting, display contrast and brightness ^ Turning the right jog shuttle clockwise increases the bar size and brightens the settings. SETTINGS F K1 2 3 4 5 L o n G k C ^ Turn the left jog shuttle to "Settings". PROGRAMMING F Y K n I I J Z LIGHTING N A ^ Turn the right jog shuttle to the desired option: Lighting n, Display contrast U, Display brightness N. ^ Press to confirm. A bar shows in the display.
Settings Automatic rinsing The rinsing feature flushes out coffee residue and pre-warms the coffee system. When "Automatic rinsing - on" is selected the system will automatically be rinsed when the appliance is turned on or off. "Heating - up please wait" is shown in the display. If this feature is set to "Automatic rinsing - off" the system will only be flushed and pre-warmed when selected manually. ^ Place an empty cup under the coffee dispenser.
Settings Steam system To conserve energy, the steam system can be turned off if steam is not used all the time. Residual heat may allow the machine to dispense some steam when the steam system is turned off. Use caution. SETTINGS F K1 2 3 4 5 L o n G k C ^ Turn the left jog shuttle to "Settings". PROGRAMMING F Y K n I I J Z ^ Turn the right jog shuttle to the "Programming" symbol, press to confirm. STEAM SYSTEM n IA M T U N ^ Turn the right jog shuttle to the "Steam system" option.
Settings Total coffee counter (INFO) Factory setting If the option "Info" is selected, the display will show the number of cups of coffee dispensed to date (espresso, coffee, double espresso / coffee). This option allows you to reset all saved settings to the factory default. K1 2 3 4 5 SETTINGS F K1 2 3 4 5 L o n G k C ^ Turn the left jog shuttle to "Settings". Y K n I I J Z ^ Turn the right jog shuttle to the "Info" symbol, press to confirm.
System lock The coffee system can be locked so that it cannot be used by children or those not familiar with the operating instructions. Locking the coffee system ^ Turn the coffee system off by pressing the left jog shuttle. SYSTEM LOCK W ^ Turn the right jog shuttle until the display shows "System lock". ^ Press to confirm. SYSTEM LOCK + W on ~ ^ Turn the jog shuttle to "on" and press to activate the system lock. The appliance is now locked and will not operate.
Daily coffee system care Turn the machine off at the main switch before cleaning. Allow the coffee system to cool before cleaning. Danger of burns! Do not clean the unit with a steam cleaner. Never use abrasive cleaning agents. These will damage the machine. Rinse If you do not wish to rinse the lines automatically, they have to be flushed manually. It is recommended that the machine is rinsed twice daily, once before using the machine and once before turning it off for the day.
Common coffee system care Interior Drip tray ^ Clean all interior parts and areas of the machine with a solution of hot water and liquid dish soap. See below for more details. ^ Clean and dry the metal contacts at the back of the drip tray. If the contacts are soiled or wet the unit cannot read when the drip tray is full and needs to be emptied. Capsule carousel and tray ^ Pull out and remove. Both pieces are dishwasher safe.
Common coffee system care Capsule plate Steam valve The capsule plate will soil more or less depending on the oil content of the coffee capsule used. Clean the capsule plate as necessary or when the machine needs to be descaled with the supplied cleaning tablets. The cleaning tablets can be purchased from Miele. ^ Press the steam lever down and pull off the rubber sleeve. ^ Clean the rubber sleeve and the steam valve tip with a mild solution of water and liquid dish soap.
Common coffee system care Exterior Cappuccinatore The front of the appliance can be cleaned with a sponge and a solution of warm water and non abrasive liquid dish soap. Dry with a soft cloth. Clean the cappuccinatore after every use, otherwise it may become blocked with dried milk and hard to clean. Only use a slightly damp sponge when cleaning the controls. Water could penetrate into the electronics and cause damage.
Common coffee system care Maintenance The perforator should be changed after 15000 cups of coffee / espresso. The perforator can be purchased from Miele. It is recommended to contact the Miele Service department for assistance in performing this maintenance task. ^ Reassemble the lid as shown in the graphics. ^ Be sure that the valve sits above the cappuccinatore handle. Otherwise the frothing process will not work. SETTINGS F K1 2 3 4 5 L o n G k C ^ Turn the left jog shuttle to "Settings".
Common coffee system care The right display goes dark and the appliance is now lowering the perforator. Remove capsule plate and change the capsule hopper ^ Open the appliance door. ^ Pull out the capsule plate. ,Do not reach up into the perforator opening. Danger of injury! ^ Screw the new perforator firmly into the unit. The spring and ball bearing must be inserted in the perforator opening so that the ball bearing is on top.
Descaling the appliance The coffee system must be descaled regularly. The time period depends on the water hardness set. The appliance will display a reminder message and will eventually lock if not descaled. Descaling Once the system is at the point where only 50 drinks can be prepared before descaling must be performed, the display will show "50 no. of uses until descaling has to be done". This message will appear and countdown after each drink.
Descaling the appliance The right display will prompt you through the single steps of the descaling process. Follow these prompts. See "Descaling prompts" for more information. Do not skip any steps and do not remove a part unless prompted by the display. This will cause the program to fault and descaling will restart. 44 At the beginning of the descaling program there will be a delayed start to allow the tablets to completely dissolve.
Descaling the appliance Descaling prompts For clarification regarding the prompts see the following: Please add descaling agent to the water container Please empty drip tray (and waste container) ^ Remove the water tank. ^ Since the machine is also rinsed inside, the drip tray needs to be emptied to continue. ^ Fill the water tank with cold tap water to the k mark. If not filled to the mark, descaling will be prematurely canceled. ^ Also empty the waste container at this time.
Fault messages If an error occurs a fault message will appear in the right display. Minor problems can be fixed without a service call. Message Possible fault Solution Chamber empty please refill The selected coffee chamber is empty. Fill with coffee capsules. Please fill with fresh water This is a reminder to fill the water tank with fresh water when the machine is turned on. Please set the time of day The machine was disconnected from the power supply and the time of day needs to be reset.
Frequently asked questions Repairs to electrical appliances should only be carried out by a suitably qualified person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work. Machine Problems What if the light does not illuminate when turned on? – Is the unit locked? – Is the lighting set too low? – If not, the light bulb has burnt out. Contact the Miele Service Department.
Frequently asked questions What if the light turns suddenly off? The light turns off automatically when the machine has not been used for 10 minutes. What if the door cannot be opened or closed? The steam lever is not pushed up all the Press the lever down and then up again way. all the way. What if the time of day needs to be reset? If the machine was unplugged or a power failure occurred. Reset the time of day.
Frequently asked questions Preparing / dispensing problems What if no drink is prepared although there are coffee capsules and water in the tank? Take out the water tank and then insert it again. What if no coffee is prepared although water is in the tank and coffee capsules are in the carousel? A coffee capsule is jammed in the carousel. ^ Open the appliance door. ^ Pull the carousel tray out, lift out the capsule carousel and make sure all capsules can move easily.
Frequently asked questions What if the steam heating system is turned off but steam can still be dispensed? Steam can be dispensed as long as the Once cooled the system will no longer steam heating system is warm. dispense steam. What if the steam smells like rubber? The rubber odor will wear off with time and usage. What if the cappuccinatore dispenses no frothed milk? – Is the spout turned to the side so that – Turn the spout to the cup.
Frequently asked questions Coffee results What if the dispensed coffee has some ground coffee in it? The capsule plate is soiled. Clean the capsule plate. What if the water flow stopped when programming the serving size? – If the maximum water amount is reached, the water dispensing stops automatically. The maximum water amount is saved. – There was not enough water in the – Refill the water tank and reset the tank. The dispensed water amount serving size. will not be saved.
Frequently asked questions Descaling problems What if the descaling process was started accidently? The descaling process cannot be interrupted once the right jog shuttle is pressed. The process now needs to be completed as a safety measure. Descaling is important to increase the life of the machine and to ensure the best results possible. What if the preheating time is increased, the water flow amount is not correct and the unit performs less? The machine needs to be descaled.
Frequently asked questions "F" messages What if F 10 shows? – No water can be pumped from the water tank. – F 10 also shows, if the water tank was not filled correctly during descaling. – Fill the system with water. See "Before using the coffee system for the first time". – Remove and reinsert the water tank. – Refill to the mark and restart descaling. – If the message still shows, contact Technical Service.
Removing a jammed capsule ,Turn the machine off at the main switch in the upper left corner. Danger of electric shock. The machine must be turned off before performing the next steps. From the carousel tray From the capsule plate ^ Take the carousel and the capsule plate out. ^ Open the appliance door. ^ Turn the machine off at the main switch. ^ Insert a spoon handle underneath the carousel tray on the right side. Move the spoon handle with care to the left side.
After sales service In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting the Technical Service Department, please quote the model and serial number of your appliance given on the data plate inside the appliance. MieleCare MieleCare, our Extended Service Contract program, gives you the assurance of knowing that your appliance investment is covered by 5 years of worry free ownership.
Electrical connection The coffee system comes equipped with a 6 ft. (1.8 m) power cord with a NEMA 5-15P molded plug for connection to a 120 V, 15 A, 60 Hz power supply. Connection should be made via a suitable isolator, with an on-off switch which should be easily accessible for servicing work. Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work.
Installation Installation options The coffee system is designed to be built into cabinetry.
Installation 58
Installation If the machine is installed in combination with other Miele appliances, it should be installed with a protective base between the appliance and the unit.
Installation A display cabinet is also available from Miele or your local dealer as an installation option. The display cabinet is intended to hold the CVA 2660 and an optional ESS 2060 Storage Drawer or EGW 2060 Cup Warmer.
Installation Installation Make sure power is not supplied to the appliance while installation or maintenance work is performed. Disconnect the power supply to the work area by unplugging the unit, tripping the circuit breaker or removing the fuse. The coffee system must be properly installed before being used. ^ Plug the appliance into the electrical outlet. ^ If you have a cabinet with 3/4" (19 mm) side panels, you will have to drill four holes first. – Center the machine in the cabinet.
Installation Programming You will then be prompted to select a language. The appliance must be correctly installed and connected before the first use. ^ Turn the right jog shuttle until the desired language shows in the display. Setting the language ^ Press the right jog shuttle to confirm. ^ Press the left jog shuttle to turn the machine on. To turn off the machine ^ Press and hold the left jog shuttle until the displays go dark.
Installation Setting the water hardness The hardness of the water used in the coffee system must be determined and programmed into the appliance. The water hardness will determine how frequently the unit must be descaled to properly maintain the coffee system. The machine monitors the volume of water passing through it in conjunction with the hardness of the water and will indicate when descaling is necessary.
Coffee glossary Caffè is the Italian term for a standard espresso. Caffè americano is a thin espresso with water added. Caffè corretto is espresso with a splash of liquor. Caffè freddo is iced coffee. An extended version of espresso served with ice. Caffè latte is a double espresso in a large cup filled with hot milk, topped with little or no foam. Caffè moca consists of equal parts of espresso, hot milk and cocoa. Caffè ristretto is the strongest most concentrated espresso.
The Espresso range Ristretto (black) is the typical Italian espresso. It is a short, strong, full-bodied espresso with a touch of acidity. It has a pleasantly lingering taste. Livanto (copper brown) A very well balanced blend, Livanto is characterized by a dense and velvety aroma. It is a uniquely rounded espresso.
The Lungo range Vivalto (sky blue) is an intense Lungo which combines a beautifully roasted note with a subtle floral note. With its noticeable crema and mild aroma, it is also delicious prepared with milk. Strength: 6 Ideal cup size: Lungo Decaffeinato Lungo (coral) delivers a smooth body and a fine roundness in the mouth. Its sustained roasting reveals flavorful grilled notes.
Caring for the environment Disposal of packing material Disposal of an old appliance The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Please recycle. Old appliances may contain materials that can be recycled. Please contact your local recycling authority about the possibility of recycling these materials. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
Alteration rights reserved / 1206 CVA 2660 M.-Nr.
