Operating instructions/Installation instructions

Table Of Contents
Installation
*INSTALLATION*
69
Installing the air duct
Mount the air duct.
If the exhaust ducting does not sit se-
curely up against the exhaust duct
connection, stick the sealing strip
supplied to the exhaust duct connec-
tion.
Ensure that the air duct is not under
mechanical tension after installation.
Length compensation
The length compensation facilitates
customer service and repair work. The
installation position of the length com-
pensation depends on the worktop
depth.
Length compensation – worktop
depth 600mm
Length compensation does not fit.
The duct piece must be at least
100mm long.
Divide the flat ducting into 2 pieces to
suit your installation situation. The
upper piece must have a minimum
length of 100mm.
Insert the short bend into the hori-
zontal bend.
Connect the duct piece with the
short bend. Fix the connection
with the sealing strip.
Adapt the remaining duct piece to
the height of the base unit.
Slide the length compensation
over the adapted duct piece. Hold
the adapted duct piece under the
duct piece on the bend. Slide the
length compensation over the duct
piece on the bend. Fix the connec-
tion with the sealing strip.