Installation and Operation Guide
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Overview
- Before using for the first time
- Suitable cookware
- Tips on saving energy
- Operation
- Safety features
- Cleaning and care
- Problem solving guide
- Optional accessories
- Service
- Installation
- Safety instructions for installation
- Safety distances
- Detailed dimensions
- Surface-mounted
- Installation notes – surface-mounted
- Worktop cut-out – surface-mounted
- Spacer bars – surface-mounted
- Installation dimensions – Surface-mounted
- Installation – surface-mounted
- Flush-fit
- Installation notes – flush-fit
- Worktop cut-out – flush-fit
- Spacer bars – flush-fit
- Installation dimensions – Flush
- Installation – flush-fit
- Gas connection
- Electrical connection
- Burner ratings
- Conversion to another type of gas
Problem solving guide
33
Problem Possible cause and remedy
The gas flame goes out
during operation.
The burner parts are not positioned correctly.
Position the burner parts correctly.
The ignitor on the
burner does not spark.
The mains circuit breaker has tripped.
If it has, contact a qualified electrician or Miele.
There is food residue stuck between the ignitor and
the burner cap.
The flame failure device is dirty.
Remove any soiling (See “Cleaning and care”).