Installation and Operation Guide
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Overview
- Before using for the first time
- Suitable cookware
- Tips on saving energy
- Operation
- Safety features
- Cleaning and care
- Problem solving guide
- Optional accessories
- Service
- Installation
- Safety instructions for installation
- Safety distances
- Detailed dimensions
- Surface-mounted
- Installation notes – surface-mounted
- Worktop cut-out – surface-mounted
- Spacer bars – surface-mounted
- Installation dimensions – Surface-mounted
- Installation – surface-mounted
- Flush-fit
- Installation notes – flush-fit
- Worktop cut-out – flush-fit
- Spacer bars – flush-fit
- Installation dimensions – Flush
- Installation – flush-fit
- Gas connection
- Electrical connection
- Burner ratings
- Conversion to another type of gas
Overview
18
Control knobs
a
Burner off
The gas supply is turned off
b
Strongest flame
The outer and inner burners are on the highest setting
c
Strong flame
The outer burner is on the lowest setting, the inner burner on the highest setting
d
Over-ignition position
The outer burner is ignited by changing from position (5) to position (3)
NB: Position (4) is a transitional setting. Continuous operation of the burner is
not recommended between positions (5) and (3).
e
Weak flame
The outer burner is off, the inner burner is on the highest setting
f
Weakest flame
The outer burner is off, the inner burner is on the lowest setting