dimension guide

Product and Cut-out Dimensions Page 4 of 5

CS 1322 BG Electric Barbecue CombiSet

1 – Wall frame

2 – Wall covering

x = thickness of the wall covering

Countertop

Safety distances to back wall

1322

Electric

Barbecue

CombiSet

If a wall covering is installed, a minimum safety distance must be maintained between the countertop cut-out

and the covering, since high temperatures can damage these materials.

–

Countertop

4 – Countertop cut-out

5 – Minimum safety distance

with flammable materials 2" (50 mm)

with non-flammable materials 2" (50 mm) minus x

If the covering is made of a combustible material (such as wood), the distance between the countertop cut-out

and the wall covering must be a minimum of 2" (50 mm).

For coverings made of non-combustible materials (such as metal, marble, granite or ceramic tiles) the

minimum safety distance between the countertop cut-out and the wall covering must be 2" (50 mm) minus the

thickness of the covering.

For example: thickness of wall covering 9/16" (15 mm) 2" (50 mm) - 9/16" (15 mm) = minimum safety distance

1 3/8" (35 mm).

Safety distances to surrounding cabinetry

Recommended Not Recommended Not Permitted

The appliance should only be installed as shown in the above illustrations while maintaining the

required safety distances shown. Do not install the appliance between two tall cabinets, this is a

fire hazard

fire

hazard

A distance of at least 2” (50 mm) must be kept between the countertop and the rear wall

because of high temperature radiated.

The minimum distance required from the countertop cut-out to a side wall or tall cabinet right or

left 8” (200 mm) (Location code 1)

Notes

All installations must be done in accordance with local codes.

Drawing is not to scale Specification Sheets OJS

02212012