Operating and Installation instructions

Cut out
^
Make the countertop cut-out for the
desired number of appliances.
Remember to maintain a minimum
safety distance from the back wall,
as well as from any tall unit or side
wall to the left or right of the
combiset.
See also the "IMPORTANT
INSTALLATION SAFETY
INSTRUCTIONS".
^
Seal the cut surfaces with a suitable
sealant to avoid swelling caused by
moisture.
The materials used must be heat
resistant.
If, during installation, the seal
around the frame does not sit flush
with the countertop in the corners,
the corner radius, maximum
3
/
16
"
(4 mm), can be carefully filed down
to fit.
Installation
28