Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the combiset 9
- Before using the combiset 11
- Operation 12
- Pans 14
- Safety features 15
- Cleaning and care 16
- Frequently asked questions 18
- Technical Service 19
- IMPORTANT SAFETY INSTRUCTIONS 22
- Installation 25
- Electrical connection 35
- Gas connection 37
- Converting to another type of gas 40
- Help protect our environment 41
Cut out
^
Make the countertop cut-out for one
or more appliances as applicable.
Remember to maintain a minimum
safety distance from the back wall,
as well as from any tall unit or side
wall to the right or left of the hob.
See "IMPORTANT SAFETY
INSTRUCTIONS".
^
Seal the cut surfaces with a suitable
heat-resistant sealant to avoid
swelling caused by moisture.
The materials used must be
heat-resistant.
If during installation the seal around the
frame does not sit flush with the
countertop in the corners, the corner
radius, maximum
3
/
16
" (4 mm), can be
carefully filed down to fit.
Installation
27