Operating and Installation Guide
Table Of Contents
- Contents
- Guide to the combiset 4
- IMPORTANT SAFETY INSTRUCTIONS 6
- Before using the combiset 11
- Use 12
- Cookware 15
- Safety features 16
- Cleaning and care 17
- Frequently asked questions 19
- Technical Service 22
- IMPORTANT SAFETY INSTRUCTIONS 25
- Installation 28
- Electrical connection 38
- Gas connection 39
- Converting to another type of gas 42
- Help protect our environment 43
Cut out
^ Make the countertop cut-out for the
desired number of appliances.
Remember to maintain a minimum
safety distance from the back wall,
as well as from any tall unit or side
wall to the left or right of the
combiset.
See also the "IMPORTANT SAFETY
INSTRUCTIONS".
^ Seal the cut surfaces with a suitable
sealant to avoid swelling caused by
moisture.
The materials used must be heat
resistant.
If during installation the seal around the
frame does not sit flush with the
countertop in the corners, the corner
radius, maximum
3
/
16
" (4 mm), can be
carefully filed down to fit.
Installation
31