Operating and Installation Guide
Table Of Contents
- Contents
- Guide to the combiset 4
- IMPORTANT SAFETY INSTRUCTIONS 6
- Before using the combiset 11
- Use 12
- Cookware 15
- Safety features 16
- Cleaning and care 17
- Frequently asked questions 19
- Technical Service 22
- IMPORTANT SAFETY INSTRUCTIONS 25
- Installation 28
- Electrical connection 38
- Gas connection 39
- Converting to another type of gas 42
- Help protect our environment 43
The igniter does not spark.
Possible fault Solution
The circuit breaker has tripped. Re-set the circuit breaker. Contact an
electrician for assistance if in doubt.
Food has deposited itself between the
ignitor and the burner cap.
See "Cleaning and care".
Food has deposited on the ignition
safety control.
See "Cleaning and care".
For safety reasons, after a spill on the combiset you may need to wait approx. 5
minutes before you are able to reignite the burner. Wait 5 minutes and ignite the
burner as usual.
Frequently asked questions
21