Operating and Installation Guide
Table Of Contents
- Contents
- Guide to the combiset 4
- IMPORTANT SAFETY INSTRUCTIONS 6
- Before using the combiset 11
- Use 12
- Cookware 15
- Safety features 16
- Cleaning and care 17
- Frequently asked questions 19
- Technical Service 22
- IMPORTANT SAFETY INSTRUCTIONS 25
- Installation 28
- Electrical connection 38
- Gas connection 39
- Converting to another type of gas 42
- Help protect our environment 43
On/Off indicator and Residual
heat indicator
When the combiset is turned on, the
On/Off indicator lights up. Once a
pre-set temperature has been reached,
the residual heat indicator will also light
up. The On/Off indicator goes out when
the combiset is turned off. The residual
heat indicator will remain on until the
combiset is cool enough to touch.
Do not touch or place any heat
sensitive objects on the combiset
while the residual heat indicator is
on. Danger of damage or injury.
If the display is flashing, a fault has
occurred. See "Frequently asked
questions".
Use
14