Operating and Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the combiset 9
- Before using the combiset 11
- Use 12
- Cookware 15
- Energy saving tips 16
- Safety features 17
- Cleaning and care 18
- Frequently asked questions 20
- Technical Service 23
- IMPORTANT SAFETY INSTRUCTIONS 26
- Installation 29
- Electrical connection 39
- Gas connection 41
- Converting to another type of gas 44
- Help protect our environment 45
Installation of multiple
appliances
When installing more than one combiset appliance, a support bar b must be
installed between the appliances.
Countertop cut-out
two appliances
For the installation of two appliances
the width of the countertop cut-out D is
the sum of A and C.
A, B and C = appliance width
11 5/16", 15" or 22 11/16"
(288 mm, 380 mm or 576 mm)
minus 5/16" (8 mm) to allow for the
overhang
D = width of the countertop cut-out
Countertop cut-out
three appliances
For the installation of three appliances
the width of the countertop cut-out D is
the sum of A and B and C.
If more than three appliances are
being installed, you will need to add,
A, B or C for each additional
appliance.
Installation
32