Operating and Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the combiset 9
- Before using the combiset 11
- Use 12
- Cookware 15
- Energy saving tips 16
- Safety features 17
- Cleaning and care 18
- Frequently asked questions 20
- Technical Service 23
- IMPORTANT SAFETY INSTRUCTIONS 26
- Installation 29
- Electrical connection 39
- Gas connection 41
- Converting to another type of gas 44
- Help protect our environment 45
The igniter does not spark.
Possible fault Solution
The circuit breaker has tripped. Re-set the circuit breaker. Contact an
electrician for assistance if in doubt.
Food has deposited itself between the
ignitor and the burner cap.
See "Cleaning and care".
Food has deposited on the ignition
safety control.
See "Cleaning and care".
For safety reasons, after a spill on the combiset you may need to wait approx. 5
minutes before you are able to reignite the burner. Wait 5 minutes and ignite the
burner as usual.
Frequently asked questions
22