Operating and Installation Guide
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS 4
- Guide to the combiset 9
- Before using the combiset 11
- Use 12
- Cookware 15
- Energy saving tips 16
- Safety features 17
- Cleaning and care 18
- Frequently asked questions 20
- Technical Service 23
- IMPORTANT SAFETY INSTRUCTIONS 26
- Installation 29
- Electrical connection 39
- Gas connection 41
- Converting to another type of gas 44
- Help protect our environment 45
,
Repairs should only be carries out by an authorized technician in
accordance with local and national safety regulations. Unauthorized repairs
could cause injury or appliance damage.
The burner does not ignite when the combiset is being used for the first
time or after an extended period of not being used.
Possible fault Solution
There could be air in the gas pipe. You may need to make several
attempts before the burner ignites
successfully.
The On/Off and residual heat indicators are flashing.
Possible fault Solution
There has been a power failure. Turn all the controls clockwise to "ß".
You can now operate the appliance as
normal.
The On/Off indicator is flashing.
Possible fault Solution
The gas supply has been cut-off. – Turn all the controls clockwise to
position "ß". You can now operate the
appliance as normal.
–
If the problem persists, disconnect
the appliance from the electrical
supply for a few seconds.
Frequently asked questions
20