Operating instructions/Installation instructions

Operation
21
 Risk of fire with overheated food.
Unattended food can overheat and
catch alight.
Do not leave the Tepan Yaki unatten-
ded whilst it is being used.
Please note that the heating-up time
is very rapid with induction heating.
Switching on the Tepan Yaki
 Touch the sensor control.
Further sensor controls will light up. If
no further entry is made, the Tepan Yaki
will switch itself off after a few seconds
for safety reasons.
Setting the power level
 Touch the appropriate sensor control
on the respective numerical keybank
for the power level you want.
Switching off
 To switch off a Tepan zone, touch the
0sensor control on the numerical
keybank for that zone.
 To switch off the Tepan Yaki and both
zones, touch the sensor control.
Residual heat indicator
If the SmartLine element is still hot, the
residual heat indicator will light up after
it has been switched off. Depending on
the temperature, a dot will appear
above power levels 1, 2 and 3.
The dots of the residual heat indicator
go out one after the other as the Smart-
Line element cools down. The last dot
only goes out when the SmartLine ele-
ment is safe to touch.
 Danger of burning due to hot
surfaces.
The surfaces will be hot after cook-
ing.
Do not touch the surfaces while the
residual heat indicators are on.