Operating instructions/Installation instructions
Table Of Contents
- Contents
- Warning and Safety instructions
- Caring for the environment
- Guide to the appliance
- How it works
- Pans
- Before using for the first time
- Operation
- Setting range
- Tips on saving energy
- Timer
- Additional functions
- Safety features
- Programming
- Note for test institutes
- Cleaning and care
- Problem solving guide
- Optional accessories
- After sales service
- Installation
- Safety instructions for installation
- Safety distances
- Installation notes – surface-mounted
- Worktop cutout – surface-mounted
- Spacer bars – surface-mounted
- Installation dimensions – Surface-mounted
- Installation – surface-mounted
- Installation notes – flush-fit
- Worktop cutout – flush-fit
- Spacer bars – flush-fit
- Installation dimensions – Flush-fit
- Installation – flush-fit
- Electrical connection
- Product data sheets
Additional functions
36
Stop&Go
When Stop&Go is activated, the power
of all cooking zones in use is reduced to
power level1.
The cooking zone power levels and the
timer settings cannot be altered; the
hob can only be switched off. The
minute minder, switch-off, Booster and
heat-up times continue to run.
When Stop&Go is deactivated, the
cooking zones will operate at the power
level previously selected.
If the function is not deactivated within
1hour, the hob will switch off.
Activating/Deactivating
Touch the sensor control.
Recall
If the SmartLine element is accidentally
switched off during use, you can use
this function to restore all the settings.
The SmartLine element must be
switched on again within 10seconds.
Switch the SmartLine element on
again.
The previously set power levels flash.
Press one of the flashing power level
indicators immediately.
The appliance will continue to operate
using the settings selected previously.