Operating instructions/Installation instructions

Warning and Safety instructions
10
 This hob must not be used in a non-stationary location (e.g. on a
ship).
 Never open the casing of the hob.
Touching or tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.
 While the hob is under warranty, repairs should only be under-
taken by a Miele authorised service technician. Otherwise the war-
ranty is invalidated.
 Miele can only guarantee the safety of the appliance when genu-
ine original Miele replacement parts are used. Faulty components
must only be replaced by Miele spare parts.
 The hob is not intended for use with an external timer switch or a
remote control system.
 The connection to the gas supply must be carried out by a suit-
ably qualified gas fitter, e.g. a Gas Safe registered technician in the
UK (see “Installation – Gas connection”).
If the plug has been removed from the connection cable or the con-
nection cable is not supplied with a plug, the hob must be connec-
ted to the electricity supply by a suitably qualified electrician (see
“Installation – Electrical connection”).
 If the mains connection cable is damaged, it must be replaced
with a special mains connection cable by a qualified electrician (see
“Electrical connection” in the “Installation” chapter).