Installation instructions

To change the jet for the inner burner
d Jet disc (main jet for the inner
burner)
e Air intake sleeve
f Vent
^
Whilst counterholding in place with
an SW 12 spanner, remove screw c
from screw fitting b using an SW 8
spanner.
^
Whilst counterholding in place with
an SW 12 spanner, remove screw
fitting b from fitting a using another
SW 12 spanner.
^
Remove jet disc d from fitting a,
and replace with the correct jet disc
(see jet table).
^
Adjust air intake sleeve e until the
two vents f havea2mmgap, as
illustrated.
^ Reassemble the parts in the reverse
order and check for leaks.
Conversion to another type of gas
49