Operating instructions/Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the appliance
- Unpacking and installing
- Operation
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Cup heating
- Making coffee with and without milk
- Making coffee with milk
- Tea
- Dispensing hot water
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and processing drinks
- Profiles: making drinks
- Expert mode
- Settings
- Networking
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Cleaning the main dispenser with integrated cappuccinatore
- Removing and cleaning the cup sensor
- Cleaning the milk siphon
- Cleaning the milk flask
- Cleaning the milk pipe manually or using the maintenance program
- Cleaning the bean system
- Cleaning the ground coffee drawer
- Vacuuming out the ground coffee chute
- Cleaning the casing
- Maintenance programs
- Rinsing the appliance
- Rinsing the milk pipe
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic descaling
- Frequently Asked Questions
- Customer Service
- Transport
- Accessories
- Saving energy
- Electrical connection
- Appliance dimensions
- Technical data
- FCC Declaration of Conformity
Frequently Asked Questions
Faults with automatic descaling
Problem Possible cause and solution
After switching on, a
message appears in-
forming you that auto-
matic descaling could
not be carried out.
If you have made drinks with milk, the milk pipe must
be pushed into the drip tray and when the machine is
switched off, the message about this in the display
needs to be confirmed with OK.
All removable parts, such as the water container, drip
tray, brew unit, or main dispenser must be installed.
The water container must be filled with water at least
up to the descaling symbol.
The service panel was not closed.
Confirm the message withOK.
Make sure that the coffee machine is ready to use
before the next descaling process.
The coffee machine was not switched off at the start
time using the On/Off button.
The coffee machine pipework will only be filled with
descaling solution when the coffee machine is
switched off.
Confirm the message withOK.
Change the start time if necessary.
Descale appliance manually
appears in the display
even though a descal-
ing cartridge which is
ready to use is installed.
Drinks cannot be made.
Depending on the water hardness level in your area
and your usage behavior, the coffee machine will
occasionally need to be descaled using the
maintenance program.
For this you will need to use a suitable descaling
agent, e.g. Miele Descaling Tablets.
Descale the coffee machine using the
maintenance program (see “Descaling the
appliance“ in the “Cleaning and care” chapter).
99