Operating instructions/Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the appliance
- Unpacking and installing
- Operation
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Cup heating
- Making coffee with and without milk
- Making coffee with milk
- Tea
- Dispensing hot water
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and processing drinks
- Profiles: making drinks
- Expert mode
- Settings
- Networking
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Cleaning the main dispenser with integrated cappuccinatore
- Removing and cleaning the cup sensor
- Cleaning the milk siphon
- Cleaning the milk flask
- Cleaning the milk pipe manually or using the maintenance program
- Cleaning the bean system
- Cleaning the ground coffee drawer
- Vacuuming out the ground coffee chute
- Cleaning the casing
- Maintenance programs
- Rinsing the appliance
- Rinsing the milk pipe
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic descaling
- Frequently Asked Questions
- Customer Service
- Transport
- Accessories
- Saving energy
- Electrical connection
- Appliance dimensions
- Technical data
- FCC Declaration of Conformity
Frequently Asked Questions
Problem Possible cause and solution
F233 The cup sensor is not inserted or is incorrectly
inserted.
The stainless steel cover of the main dispenser was
not installed properly, e.g. is tilting forwards slightly.
If the main dispenser is moving upwards and the cup
sensor is bumped, e.g. with a cup, the cup sensor
loses its reference position.
Confirm the message withOK.
Switch the coffee machine off with the On/Off
button. Wait for at least 30minutes before
switching the machine back on again. Or
disconnect the appliance from the electricity
supply by removing the plug from the socket or
switching off the fuse.
Refit the cup sensor.
Refit the stainless steel cover. Make sure the cover
is installed correctly.
F355, F357– F362 The bean system must be set up again, e.g. coffee
beans have possibly got jammed.
Switch the coffee machine off with the On/Off
button. Wait for 30minutes before switching
the machine back on again.
93