Operating instructions/Installation instructions

Cleaning and care
76
If necessary, you can remove the
connecting piece and seal from the
milk flask lid. Once you have removed
the stainless steel tube, the
connecting piece is easy to push out
from the inside of the lid. Clean the
individual components in a
dishwasher.
Cleaning the milk pipe
manually or using the
maintenance program
 Risk to health due to inadequate
cleaning.
Milk naturally contains bacteria. Heat
and moisture inside the coffee
machine can cause these bacteria to
multiply, e.g. milk residues can go off
and pose a risk to health.
Clean all components in which milk
is transported thoroughly on a
regular basis.
The coffee machine milk pipe must be
cleaned at least once a week. A
message in the display will prompt you
when this needs to be done.
 Confirm the message withOK.
When you confirm the message Clean
milk pipework with OK, the internal
counter for the cleaning interval will be
reset. You will not be reminded again.
There are two options for cleaning the
milk pipe:
- You can remove and dismantle the
main dispenser with its integrated
cappuccinatore and either wash it in
the dishwasher or by hand with warm
water and a little liquid dish soap (see
“Cleaning the main dispenser with
integrated cappuccinatore”).
- Or you can clean the milk pipe using
the Clean milk pipework maintenance
program together with the Miele
Cleaning Agent for the milk pipework
(see “Cleaning the milk pipe”).
Tip: In addition to your weekly cleaning
routine, we recommend carrying out the
alternative cleaning procedure once a
month. For example, if you manually
clean the machine once a week, then
you should run the maintenance
program once a month. This
combination will ensure that the milk
pipe is cleaned optimally.