Operating instructions/Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the appliance
- Unpacking and installing
- Operation
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Cup heating
- Making coffee with and without milk
- Making coffee with milk
- Tea
- Dispensing hot water
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and processing drinks
- Profiles: making drinks
- Expert mode
- Settings
- Networking
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Cleaning the main dispenser with integrated cappuccinatore
- Removing and cleaning the cup sensor
- Cleaning the milk siphon
- Cleaning the milk flask
- Cleaning the milk pipe manually or using the maintenance program
- Cleaning the bean system
- Cleaning the ground coffee drawer
- Vacuuming out the ground coffee chute
- Cleaning the casing
- Maintenance programs
- Rinsing the appliance
- Rinsing the milk pipe
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic descaling
- Frequently Asked Questions
- Customer Service
- Transport
- Accessories
- Saving energy
- Electrical connection
- Appliance dimensions
- Technical data
- FCC Declaration of Conformity
Cleaning and care
70
Cleaning the drip tray and
grounds container
Danger of burning and scalding
on hot components or by hot liquids.
Components can become very hot
during operation. Touching hot
components can cause burning. The
liquids and steam dispensed are very
hot and can cause scalding.
If the pipework has just been rinsed,
wait a while before removing the drip
tray.
Please be aware that water in the
drip tray can also be very hot.
Do not touch hot components.
Clean the drip tray and grounds
container every day to avoid
unpleasant smells and mildew.
The grounds container is located in the
drip tray. Water from rinsing also
collects in the grounds container.
A prompt will appear in the display
when the drip tray and/or the grounds
container is full and needs to be
emptied. Empty the drip tray and the
grounds container.
Remove the drip tray and the grounds
container while the coffee machine is
switched on. Otherwise, the message
Empty the drip tray and the waste
container will appear in the display,
even though the drip tray and/or the
grounds container are not filled to the
maximum level.
Pull the drip tray carefully out of the
coffee machine.
Empty the drip tray and grounds
container.
Remove the drip tray cover, the
drip tray, and the lower panel.
Clean the lower panel by hand only
using warm water and liquid dish
soap.
All other parts are dishwasher-safe.
Clean all parts thoroughly.
Clean the contacts (metal discs) and
the space between them carefully.
Dry everything thoroughly.
The contacts will not be able to detect
that the drip tray is full if they are
damp or dirty.
Check the contacts and the area
around them once a week.