Operating instructions/Installation instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Guide to the appliance
- Unpacking and installing
- Operation
- Before first use
- The bean system
- Filling the water tank
- Switching on and off
- Dispenser adjustment
- Cup heating
- Making coffee with and without milk
- Making coffee with milk
- Tea
- Dispensing hot water
- Parameters
- Portion size
- Resetting drinks
- Profiles
- Profiles: creating and processing drinks
- Profiles: making drinks
- Expert mode
- Settings
- Networking
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Cleaning the drip tray and grounds container
- Cleaning the drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Cleaning the main dispenser with integrated cappuccinatore
- Removing and cleaning the cup sensor
- Cleaning the milk siphon
- Cleaning the milk flask
- Cleaning the milk pipe manually or using the maintenance program
- Cleaning the bean system
- Cleaning the ground coffee drawer
- Vacuuming out the ground coffee chute
- Cleaning the casing
- Maintenance programs
- Rinsing the appliance
- Rinsing the milk pipe
- Cleaning the milk pipework
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Automatic descaling
- Frequently Asked Questions
- Customer Service
- Transport
- Accessories
- Saving energy
- Electrical connection
- Appliance dimensions
- Technical data
- FCC Declaration of Conformity
Profiles: creating and processing drinks
55
You can save frequently made drinks in
a profile with your own individual
settings (see “Profiles”).
You can also change the names of your
drinks and delete any unwanted drinks
from your profile. You can save a
maximum of ten drinks in a profile.
The Drinksmenu is displayed. First open
the profile you want:
TapProfiles.
Select the profile you want.
The name of the current profile is
shown in the top left of the display.
Creating a drink
You can create new drinks based on
existing drinks.
TapCreate drink.
Now select a drink.
Change the portion size and drink
parameters for this drink as required.
Preparation will be begin and you can
save the portions for each component
as you wish.
Enter a name for the new drink
(maximum8characters) and
tapSave.
The newly created drink will appear in
the profile.
Changing a drink: changing the
portion size, drinks
parameters, and names
The desired profile with the newly
created drinks will appear in the display.
Select Edit drink.
TapChange drink.
Select a drink.
You can now change the portion size,
drinks parameters, or the names as
described.
Deleting a drink
The desired profile with drinks will
appear in the display.
Select Edit drink.
TapDelete drink.
Select the drink you want and
tapOK.
The entry will be deleted.